We Reviewed the 8 Best Hybrid Table Saws of 2019 and Here’s What We Found

Hybrid table saws fill a rather big gap between portable jobsite saws on the one side and full-sized cabinet maker models on the other. Due to the nature of the hybrid class, they come in many different shapes and sizes and oftentimes it isn’t easy to pick the right one.

In this article, you’ll find the best hybrid table saw reviews along with an in-depth buyer’s guide. A brief FAQ section is also included.

Things to Consider Before Buying a Hybrid Table Saw

Build Quality

Since you’ll most likely be taking on larger projects and bigger pieces of wood, it is essential to have a sturdy, well-built table saw. Inspect the motor, cabinet (if there is one), arbor, blade, and the working table. Start by looking into the best brands, such as these, as they usually come with guarantees.

The major parts must not feel flimsy or loose. They should be tight but still work smoothly. Also, avoid hybrid table saws with plastic parts. Durable plastic might work for small and cheap benchtop table saws, but they have no place on a hybrid table saw.

Power

Hybrid table saws usually feature motors ranging from 1.75HP to 3HP. On the lower end, there are models with 1.5HP motors, though some models on the other end of the spectrum can have 4HP and even 5HP motors.

Motors with fewer HP are more likely to be pre-wired to work at 110-120V, which makes them more suitable for home workshops and DIY-ers. Models in the 1.75-3HP range are often able to work in both 110V and 220V modes, though they are pre-wired for one of them.

Models with 4HP and 5HP motors are routinely made to work at 220 volts. They are made for professional settings and are not recommended for garage workshops.

Cutting Depth and Accuracy

When buying a hybrid table saw, you should also consider cutting depth and accuracy.

In the hybrid class, 10” blades are a standard. Most models have a maximum cutting depth at 90 degrees ranging from 3” to 3-1/2”. The maximum cutting depth at 45 degrees varies from 2-1/4” to 2-1/2”.

When it comes to accuracy, all hybrid table saws are equipped with miter gauges. Some expensive models also use lasers to track and control cutting precision.

Safety

Make sure that the saw you decide on has at least a proper blade guard and anti-kickback pawls. If these two are included, there is a high chance that you will also get a push stick. It is also good to have a quality riving knife.

Some high-end models also have flesh sensors. A flesh sensor monitors the blade, and as soon as it registers that your hand has made contact with the blade, it stops the blade, retracts it below the table, and shuts the motor down. This feature was introduced to decrease the number of serious injuries caused by table saws. According to the Consumer Safety Product Commission (CPSC), 33,400 table saw injuries happened in 2015 alone. [1]

Since table saws can be very noisy, it is recommended to wear ear protection. [2] It is also advisable to wear eye protection and a breathing mask to prevent sawdust from flying into your eyes and to make sure you don’t breathe it in. [3]

“The main advantage of hybrid table saws over traditional contractor saws is superior dust collection. On the other hand, they’re stronger than jobsite saws.”

Matthias Wandel, Woodworker

Reviews of the 8 Best Hybrid Table Saws

1. Grizzly G0690 – The Best Overall

Grizzly G0690 – The Best Overall

Specifications

  • 3HP Leeson motor
  • No-load speed of 4,300rpm
  • Blade guard with anti-kickback pawls
  • 29-1/2” rip capacity
  • Dado inserts included
  • Cast iron trunnions
  • 3-1/8” maximum cut depth

“45 and 90 degrees on the miter gauge are right on the money. This is one of the best miter gauges I’ve seen on a table saw.”

WorkshopAddict on the Grizzly G0690

The Grizzly G0690 is our pick for the best hybrid table saw. This mighty saw is a standard 10” model with a well-built cabinet, powerful motor, and a big table. 

The build of this Grizzly is outstanding, and the motor is a single-phase unit with belt drive. It works at 220V and delivers a pretty respectable 3HP with a lot of torque. The power is transferred to the blade via the belt drive system.

The blade measures 10” in diameter and features 40 carbide teeth. It leans to the left and is paired with a standard 5/8” arbor. It can cut as deep as 3-1/8” in the upright position, while the maximum depth decreases to 2-3/16” at a 45-degree angle. You can also use 13/16” wide dadoes with this saw. A blade guard and riving knife are also included.

The table is made of cast iron and it features HDPE face and T-fence. You can extend it to 29-1/2”. The Grizzly G0690 is delivered with a very precise miter gauge. A set of dado inserts is also included. Finally, this saw features an elaborate blade guard with a pair of anti-kickback pawls.

BEST SUITED FOR – professional workshops as well as smaller home projects.

2. SawStop CNS175-TGP36 – The Safest Hybrid Table Saw

SawStop CNS175-TGP36 – The Safest Hybrid Table Saw

Specifications

  • 1.75HP motor
  • 52” rip capacity
  • SawStop safety system
  • Includes kickback pawls, riving knife, and blade guard
  • 4” dust collector

The SawStop CNS175-TGP36 is popularly known as the SawStop Contractor. It offers excellent build quality, a powerful motor, and fantastic rip capacity. However, the highlight of this model is its super-quick SawStop safety system.

The SawStop safety system has an electronic sensor wired to the blade. Once your finger or another part of the body touches the blade, the system stops it within 5 milliseconds. Of course, this saw also features the standard safety measures such as the blade guard, anti-kickback pawls, and riving knife.

The Contractor is equipped with a strong, well-built motor that delivers 1.75HP and an immense amount of torque. It is wired to work at 110V and is paired with a 10” blade that sits on a standard 5/8” arbor. The blade features carbide teeth and tilts to the left. The maximum cutting depth is 3-1/8” in the neutral position. At a 45-degree angle, this saw can give you 2-1/4”.

The CNS175-TGP36 also features a big cast iron table with an easy-to-use fence system. The maximum rip capacity is an impressive 52” to the right side.

BEST SUITED FOR – anyone concerned with safety.

3. Ridgid R4512 – The Best Budget Model

Ridgid R4512 – The Best Budget Model

Specifications

  • 13 amp, fan-cooled motor
  • Works at both 110V and 220V
  • 10” blade with carbide tips
  • 45-degree tilt
  • Includes a riving knife, blade guard, and push stick
  • 3-1/4” cutting depth

The Ridgid R4512 is the best option for those looking to upgrade from a portable jobsite saw on a limited budget. Thanks to the masterful combination of affordability, high-quality build, and cutting precision, this model can give the more expensive options a good run for their money.

The Ridgid R4512 has a 13 amp motor instead of a standard 15 amp option. However, it can spin the blade up to 3,450 revolutions per minute when there’s no load. It features a belt drive system and can work at both 110V and 220V.

The blade measures 10” in diameter and it’s coupled with a standard 5/8” arbor. It features carbide teeth and the maximum cutting depth of 3-1/4”. The included riving knife and quality blade guard make up this model’s safety features. The package also features a push stick. You can tilt the blade up to 45 degrees.

The table on this model is made of cast iron and it’s extendable to the right of the blade. It has an easy-to-use fence that can be locked into place.

BEST SUITED FOR – semi-professionals and DIY-ers.

4. Laguna Tools Fusion – The Smoothest Operation

Laguna Tools Fusion – The Smoothest Operation

Specifications

  • 1.75HP motor
  • Lightweight construction
  • 10” blade with 5/8” arbor
  • 3-1/8” maximum cut depth
  • Can work at 115V and 230V
  • 36” rip capacity
  • Features a blade guard and riving knife

When shopping for a hybrid table saw, make sure that it is well-built and that it offers plenty of power and precise cuts.

The Laguna Tools Fusion is a sleek hybrid table saw equipped with some nifty features. Its strongest points include the smooth operation, excellent cut precision, and modern design. Thanks to the somewhat lighter but still sturdy construction, it is oriented more towards DIY projects.

The Laguna Tools Fusion has a standard-sized 10” blade that’s coupled with a 5/8” arbor. The blade has carbide teeth and is paired with a pretty neat blade guard. It also has a riving knife and a push stick. The blade can cut as deep as 3-1/8” at a 90-degree angle and 2-1/8” at 45 degrees, which is also its maximum tilt. You can also use 13/16” dado blades with this hybrid table saw.

The motor delivers 1.75HP and can work at both 115V and 230V, though it is pre-wired for the former. It can spin the arbor and the blade at a maximum of 4,500rpm. Unlike the majority of hybrid saws, the Fusion’s motor is attached to the frame instead of the tabletop.

In terms of cutting and ripping capacity, the Fusion is equipped with an extendable cast iron table with an adjustable fence. You can extend it to the right up to 36”. A blade guard and riving knife make up this model’s main safety features.

BEST SUITED FOR – home workshops.

5. Powermatic PM1000 – The Most Bang for Your Buck

Powermatic PM1000 – The Most Bang for Your Buck

Specifications

  • 1.75HP motor
  • 10” blade
  • 3-1/8” cutting depth
  • Riving knife
  • Blade guard with anti-kickback system
  • Adjustable miter gauge

The Powermatic PM1000 is a true workhorse among hybrid table saws. It is a heavy-duty machine made for tough tasks. The main features include super-sturdy build, robust motor, and a great rip capacity. Other than that, this saw has a smart dust collection system.

The motor of the PM1000 delivers 1.75HP and an abundance of torque. It is wired to work at 115V which puts it in the same class with the most energy-efficient models out there. It also features a modern belt drive system.

The PM1000 has a 10” blade with carbide teeth and 3-1/8” maximum cutting depth, and you can detach and replace it at the push of a button. The blade also features a simple blade guard with an anti-kickback system in the back as its main safety features. The miter gauge on this model can tilt up to 60 degrees on both sides and is very reliable.

Similar to many other hybrid table saws, the PM1000 has an adjustable table made of iron. You can extend it to a maximum of 30” to the right of the blade. It also has an adjustable fence that you can lock into place.

BEST SUITED FOR – heavy-duty tasks.

6. Shop Fox 1837 – The Most Versatile Hybrid Table Saw

Shop Fox 1837 – The Most Versatile Hybrid Table Saw

Specifications

  • 2HP motor
  • Works at 120V and 240V
  • 3-1/4” maximum cutting depth
  • Maximum rip capacity of 30”
  • 4” dust collection port
  • Cast iron trunnions
  • 10” blade
  • Comes with a blade guard, riving knife, and anti-kickback pawls

Though not the most modern looking, the Shop Fox 1837 has a robust construction, a strong motor, and a good rip capacity to both the left and right of the blade.

The W1837 starts off with a 2HP motor with the maximum no-load speed of 3,450rpm. It can work at both 120 and 240 volts, though it is pre-wired to work at 120V. In the 120V mode, it works at 15A, while at 240V, it works at 7.5A.

This mighty saw also features cabinet-mounted trunnions that absorb vibration and ensure proper miter slot alignment. They also allow for easy blade angle and height regulation. The metal cabinet also features a 4” dust port, which is among the biggest in the class.

The blade measures 10” in diameter and is paired with a standard 5/8” arbor. Its maximum cutting depth at neutral position is 3-1/4”, while at 45 degrees it can reach 2-1/4”. The blade tilts to the left and features a riving knife and a transparent blade guard with anti-kickback attachments in the back as its main safety features.

BEST SUITED FOR – professional settings in large workshops.

7. Rockwell RK7241S – The Most Precise Hybrid Table Saw

Rockwell RK7241S – The Most Precise Hybrid Table Saw

Specifications

  • Laser tracking system
  • 15 amp motor works at 120V
  • 4,800rpm no-load speed
  • Solid stand with wheels
  • 3-9/16” maximum cutting depth
  • 30” rip capacity
  • Blade guard
  • Riving knife
  • 10” blade with carbide teeth

Hybrid table saws can get very loud, so make sure you’re wearing proper ear protection when working.

If cutting precision is the main thing your looking for, then the Rockwell RK7242S is the table saw for you. It has a standard 10” blade with carbide teeth and a standard 5/8” arbor. It can cut as deep as 3-9/16” at a 90-degree angle and 2-9/16” at 45 degrees. It is equipped with a see-thru blade guard and a riving knife.

The most prominent feature of this hybrid table saw is its unique laser tracking system. It is equipped with a laser system that tracks the exact angle of the blade and shows it on a table-mounted display.

Its motor is a standard 15 amp unit with belt drive system and a maximum no-load speed of 4,800rpm. It works at 120V and offers a considerable amount of torque seeing as this is a mobile table saw.

The saw is equipped with a lightweight and strong stand. You can fold and unfold it in a matter of seconds, and it also has a set of wheels for even greater mobility.

BEST SUITED FOR – DIY projects.

8. Shop Fox W1851 – The Sturdiest Hybrid Table Saw

Shop Fox W1851 – The Sturdiest Hybrid Table Saw

Specifications

  • 2HP motor
  • Pre-wired to work at 220 volts
  • Cast iron trunnions
  • Supports 13/16” wide dado blades
  • 30 + 12” rip capacity
  • 3-1/8” maximum cutting depth
  • Riving knife and blade guard

The Shop Fox W1851 is made for tough tasks and big projects, and it’s fairly affordable too.

This hybrid table saw has a 2HP motor that can run on either 110 or 220 volts, though it is pre-wired for the latter. This means it is primarily oriented towards professional settings and rather large projects. The motor is belt-driven and attached to the cabinet instead of the working table. The cabinet has a one-piece frame with cast iron trunnions.

The W1851 also has a 10” blade with carbide teeth and a 5/8” arbor. It is equipped with a transparent blade guard and can tilt up to 45 degrees. The blade tilts to the left and has a maximum cutting depth of 3-1/8” at 90 degrees. The cutting depth at 45 degrees is 2-3/16”. The blade can support up to 13/16” wide dado inserts.

The table is made of cast iron and it has an adjustable rip fence. Its rip capacity is 30” to the right of the blade and 12” to the left of it. The safety section comprises a riving knife and blade guard.

BEST SUITED FOR – large workpieces and long working sessions.

FAQs

1. What’s a hybrid table saw?

A hybrid table saw is a cross between the cabinet maker and contractor or “jobsite” table saw concepts. 

Hybrid table saws are stationary models, as opposed to the portable jobsite models. This means that hybrid table saws tend to be stronger and have more horsepower. Also, it is not uncommon for them to have a greater rip capacity than a contractor/jobsite model.

When compared to the cabinet maker variety, hybrid table saws are a bit smaller and have less power. Cabinet maker models routinely work at 220-240V, while only the biggest hybrid models come pre-wired for 220 volts.

2. What does a riving knife do?

A riving knife is an important part of a table saw’s safety equipment. It is a flat metal piece located just behind the blade. Its main role is to prevent kickback, and it is especially important when you’re performing rip cuts.

When you push a piece of wood through your saw’s blade, the riving knife prevents the pieces from coming back together and causing kickback. Have in mind that stronger saws have stronger kickback.

On the majority of models, the riving knife is mounted on the trunnion, the same mechanism that lowers and lifts the blade. Many riving knives have release systems that allow the user to set them both lower and higher than the blade itself.

3. What are anti-kickback pawls?

Anti-kickback pawls are the latches that prevent the wood from moving. They are, as their name suggests, used to reduce the occurrence of kickback in table saws.

Anti-kickback pawls are usually installed in pairs behind the blade. They go over the wood with their pointy teeth and are designed only to allow forward motion. You can’t pull the wood back once the pawls have grabbed it. That’s why you can only use them for through cuts.

You should take the pawls off if you’re performing partial cuts, as they won’t let you pull the wood out. Also, if you’re using dado blades, you should remove them.

Verdict

Hybrid table saws sit between jobsite and cabinet maker models, and there’s a huge variety of models available. The decision which one is the best depends on your needs and preferences.

Here is a quick summary of all reviewed models:

  • Grizzly G0690 – Best for professionals
  • SawStop CNS175-TGP36 – Best for those who value safety above all
  • Ridgid R4512 – The best option for those on a tight budget
  • Laguna Tools Fusion – Best for those who want a smooth operating table saw
  • Powermatic 1000 – Best for those who want the most quality for their money
  • Shop Fox W1837 – Best for those who want superior versatility
  • Rockwell RK7241S – Best for high-precision projects
  • Shop Fox W1851 – Best for those looking for the sturdiest hybrid table saw out there

When shopping for a hybrid table saw, make sure to take its build quality, power of the motor, cutting depth, accuracy, and safety features into consideration. Your budget will likely influence your final choice, but never cut corners when it comes to safety.

References:

  1. Safety Standard Addressing Blade-Contact Injuries on Table Saws. (2017, May 12). Retrieved August 5, 2019, from https://www.federalregister.gov/documents/2017/05/12/2017-09098/safety-standard-addressing-blade-contact-injuries-on-table-saws
  2. How Loud Is Too Loud? (n.d.). Retrieved August 5, 2019, from https://www.osha.gov/SLTC/noisehearingconservation/loud.html
  3. Report on Carcinogens, Background Document for Wood Dust. (2000, December 13). Retrieved August 5, 2019, from https://ntp.niehs.nih.gov/ntp/newhomeroc/roc10/wd_no_appendices_508.pdf